background: phenol is an organic pollutant found in industrial effluents that is very toxic to humans and the environment. this study used pomegranate peel ash as a natural absorbent to remove phenol from aqueous solutions. methods: in this study, pomegranate peel ash in different doses was used as a new adsorbent for the removal of phenol. the effects of contact time, ph, adsorbent dose and in...

tabas mines in iran have coal sources which are suitable for use in metallurgy industries as coking coal. but the high sulfur content of this coal imposes severe limitations on its utilization as the sulfur oxide gases evolved from the combustion of high sulfur coals result in acid rains and corrosion of equipments. in this work, attempts have been made to reduce sulfur from high sulfur coal of...

an efficient method was employed for the ash and pyrite sulphur removal from bitumen using column flotation process. the bitumen samples containing 9.6% sulphur (6.81% in the pyrite sulphur form) and 26.4% ash were successfully showed up to 75.20% of pyrite sulphur (e.g.; 51.66% of total sulphur) and 70.81% of ash removal. the box-behnken design (bbd) was employed to design the experiments, to ...

Emerald ash borer, Agrilus planipennis (Fairmaire) (Coleoptera: Buprestidae), plays a significant role in the health and extent of management of native North American ash species in urban forests. An economic analysis of management options was performed to aid decision makers in preparing for likely future infestations. Separate ash tree population valuations were derived from the i-Tree Street...

this study investigates removing ash and pyrite sulphur from bitumen by column flotation process. central composite design (ccd) of response surface methodology (rsm) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. the effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...

Abstract Background: Photocatalytic process is used as a suitable method for o-chlorophenol removal. In this study, the efficiency of a mixture of modified fly ash and TiO2 nanoparticles in photocatalytic removal of o-chlorophenol was evaluated. Methods: After acid washing of fly ash, the absorbent was oxidized with potassium permanganate. ...

Batch experiments were conducted to test the effects of various solution properties, such as pH, temperature, initial concentration and anoxic and aerobic atmosphere, on Cd removal by nanoscale zerovalent iron (nZVI) supported on industrial coal fly ash. Cd (II) could be removed by adsorption on fly ash-nZVI in a very short time (5 min) with high removal rates (greater than 99.9%) over a wide r...

The adsorption of Cr(III) and As(III) by using coal ash from thermal power plants in batch mode ,The effect of adsorbent agitation speed, dose, pH, contact time and agitation speed on the adsorption of Cr(III) and As(III) by coal ash is examined. Adsorption equilibrium was achieved in 50–55 min. The Langmuir, Temkin and Freundlich adsorption isotherms were used to observed sorption phenomena. T...

The removal of heavy metals, especially from wastewater, has attracted significant interest because of their toxicity, tendency to bioaccumulate, and the threat they pose to human life and the environment. Many low-cost sorbents have been investigated for their biosorption capacity toward heavy metals. However, there are no reports available on the removal of Pb(II) from aqueous solution by of ...